LD Systems MIBS Manual De Usuario página 5

DANGER OF SUFFOCATION! KEEP AWAY FROM CHILDREN! THE PRODUCT CONTAINS
SMALL PARTS THAT CAN BE SWALLOWED AND PACKAGING MATERIAL THAT CAN BE
SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF REACH OF CHILDREN!
INTRODUCTION
The LD MIBS solid microphone base features a female XLR connector, a push
button and an illuminated status indicator on the top, a male XLR connector on
the rear and an operating mode selector switch on the bottom. Phantom power
is required for operation. The microphone base is suitable for both dynamic and
condenser microphones.
COMPONENTS, CONNECTIONS, DISPLAYS AND CONTROLS
2
1
Female 3-pin XLR connector for connecting a microphone .
2
Push-button with multiple functions
5
(see item Operating mode selector switch).
3
Microphone symbol with illumination to indicate the operating status.
The microphone symbol lights up white when the microphone is active.
4
Male 3-pin XLR socket for connecting the microphone signal to an installation
mixer or similar.
1
3
4
5
5