• Pre-heat the appliance for about 5 minutes. Pre-heating is finished when
the red indicator light is off.
In order to preserve the non-stick properties of the coating, avoid
excessive pre-heating with the appliance empty.
On the first use, there may be a slight odour and a little smoke during
the first few minutes.
Never leave the appliance unattended when in use.
COOKING
After pre-heating, the appliance is ready.
To preserve the non-stick properties of the coating:
- Use preferally, use a wooden spatula to turn the food over,
- never cut food directly on the plates.
- Do not cook food in aluminium foil.
To prevent damage to the plates, only use them on the appliance for
which they were designed (e.g., do not place in a oven, on the gas ring
or electric hot-plate, etc.)
Do not use aluminium foil or other objects between the plate or the
grill and the food being cooked.
Do not put any cooking utensils on the appliance to heat up.
Do not touch the metal parts of the appliance when it is heating or
operating, as they are very hot.
Use the handle and wear oven gloves if necessary.
Do not move the appliance when in use.
Thermostat locations (3)
1- Warm: recommended for heating.
2- Hot: Recommended for tost, fish, etc.
3- Too Hot: Recommended for red meat, chicken, sausage etc.
For the Grill function
• Place the food on the lower grill.
• Close the appliance
20
INGLÉS
20