Publicidad
Idiomas disponibles
Idiomas disponibles
13
to 6 a.m.). Once the watch indicates the correct
time, push the crown home and screw it tight again.
Caution:
Please set the time before you put the watch on.
This prevents lateral pressure on the winding stem. Please
use your fingernails to pull the crown out and turn it gently
between two fingertips.
date correction
The date indicated by your Aquanaut Travel Time
refers to the local time zone. To correct the date
display, actuate the correction push piece at
4 o'clock as many times as needed to indicate the
correct date.
Caution:
The date correction mechanism is blocked between
10 p.m. and 2 a.m. If you need to change the date, please do
so between 2 a.m. and 10 p.m.
display of a second time zone
Your watch has two center hour hands that move
synchronously and can be superposed. When the
two hands are not superposed, the solid hand
indicates local time (in the time zone in which
you are currently located) while the skeletonized
hand indicates home time (at your normal place of
residence or work). With the pushers in the case
flank at 8 and 10 o'clock, you can move the solid
local time hand clockwise or counterclockwise in
one-hour steps.
Caution:
Before you set a second time zone (local time),
check the day/night indicator at 3 o'clock (HOME) to make
sure that the two superposed hour hands indicate the correct
time at home and that the day/night indicator correctly dis-
plays daytime or nighttime hours, for instance 6 a.m. or 6 p.m.
Publicidad
