Publicidad
MO6475
Speaker with wireless charger
EN
Wireless specifications
Wireless version:
Battery capacity:
Charging current:
Charging voltage:
Charging time:
Rated impedance:
Rated power:
Frequency response: 280-16KHz
Signal to noise ratio:
Turn the power switch to the "ON" position, you will hear a start-up
tone, the blue light will flash slowly. On your device turn on
wireless function to search for the device name MO6475 and
connect, when the pairing is successful the light will remain on,
and the audio may be played from the device. To Increase or
decrease the playback volume, or play the previous or next song
this must be operated via the phone
Wireless charging specifications
Input:
Output:
Receiving distance:
Working frequency:
Conversion efficiency:
Steps for usage:
1. Connecting with the supplied USB cable and the power is on,
the red light is always on. At this time, the product enters the
wireless charging standby mode and charges the battery, and
the red light is off when it is fully charged.
2. Charge the device. When the device is put on the wireless
5.1
3.7V, 2000mAh, 7.4Wh
1A
4.8-9V
about 3 hours
4Ohm
3W
greater than 65db
DC 5V/2A, 9V/2A
5W / 7.5W / 10W
2-8MM
100-205kHz
70%
Publicidad
