Guardian Extra Indoor Pet Barrier Guía De Uso página 6

Set Up the Barrier Transmitter
Important: Never perform set up procedures while your pet is
wearing the Receiver Collar.
Turn over the Barrier Transmitter and slide open the
battery door. Install three AA alkaline batteries into the
Barrier Transmitter and replace the battery door. Turn
the Barrier Transmitter right side up and press the up (+)
arrow button once to turn ON the Barrier Transmitter.
You should see a black bar in the upper right hand corner
of the LCD display window indicating that the Barrier
Transmitter is set to mode A* as shown. You should also
see a second black bar in the bottom of the LCD display indicating the range
is set to one segment. Each segment represents approximately two feet of
diameter. You can create a Barrier Area of 2 feet in diameter up to 12 feet in
diameter depending on the surface the Barrier Transmitter is on. Using the up
(+) and down (-) arrows, adjust the range to fi t the desired pet Barrier Area.
*All Indoor Barriers and Receiver Collars are preset to mode A. The A and
B mode feature is designed to be used in multiple pet households where
you may want one pet to be able to access an area while preventing access
by another pet. For single pet households, you will not need to operate the
Barrier Transmitter in any mode other than A.
6 1-800-732-2677 (US) • 1-800-457-3911 (Canada)
All manuals and user guides at all-guides.com