Publicidad
Idiomas disponibles
Idiomas disponibles
•
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
2.5
SERVICE
•
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
•
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
3
SPECIFIC SAFETY RULES
•
Know your power tool. Read operator manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
power tool. Obey this instruction will reduce shock,
fire or serious injury.
•
Battery tools do not have to be plugged into
an electrical outlet; thus, they are always
in operating condition. Be aware of possible
hazards when not using your battery tool or
when changing accessories. Obey this instruction
will reduce the risk of electric shock , fire, or serious
injury,
•
Do not place battery tools or their batteries near
fire or heat. This will reduce the risk of explosoion
and possibl injury.
•
Do not crush, drop or damage battery pack. Do
not use a battery pack or charger that has been
dropped or received a sharp blow. A damaged
battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
•
Batteries can explode in the presence of a
source of ignition, such as a pilot light. To
reduce the risk of serious injury, never use
any cordless product in the presence of open
flame. An exploded battery can propel debris and
chemicals. If exposed, flush with water immediately.
•
Do not charge battery tool in a damp or wet
location. Obey this instruction will reduce the risk
of electric shock.
•
For best results, your battery tool should be
charged in a location where the temperature is
more than 50°F but less than 100°F. To reduce
the risk of serious injury, do not store outside or in
vehicles.
•
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in
contact with your sink, wash immediately with soap
and water. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
English
immediate medical attention. Obey this instruction
will reduce the risk of serious injury.
•
Keep these instructions. Refer to them
frequently and use them to instruct others who
may use this tool. If you borrow someone this
tool, loan them these instructions also to prevent
incorrect use of the machine and possible injury.
•
When using flashlights or lanterns, additional
precautions should always be followed,
including the following:
•
To reduce the risk of injury, close supervision is
necessary when a product is used near children.
•
Do not contact hot parts.
•
Only use attachments recommended or sold by
the manufacturer.
•
Do not use in the rain.
•
To reduce the risk of electrical shock, do not put
in water or other liquid. Do not place or store
product where it can fall or be pulled into a tub
or sink. Replace with specific part of product in
question.
•
To reduce the risk of injury, do not stare at
operating lamp. Serious eye injury could occur.
4
SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this
tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate
the tool better and safer.
Symbol
V
A
Hz
Wh
Ah
Lm
5
RISK LEVELS
The following signal words and meanings are intended
to explain the levels of risk associated with this product.
5
Explanation
Voltage
Current
Frequency (cycles per second)
Energy Storage Capacity
Current Capacity
Lumen
Direct current
Do not expose the product to rain or
moist conditions.
Read and understand all instructions
before operating the product, and fol-
low all warnings and safety instruc-
tions.
Precautions that involve your safety.
EN
Publicidad
