Smartpond 91340 Manual De Instrucciones página 4

WARNINGS AND CAUTIONS
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully prior to starting up the unit!
The water system on which the operation of this product is based
requires utmost care and maintenance, possibly also the use of
chemicals, in order to prevent and keep the occurrence of micro-
organisms and harmful bacteria, especially legionellae that are
responsible for legionnaire's disease, under control. Non-observance
of this information about correct maintenance and care can entail
the spreading of harmful bacteria. Due to the fact that for decorative
purposes, water nozzles distribute water in the air, water droplets
containing harmful bacteria can enter your lungs and cause life-
threatening diseases.
It is the responsibility of the owner of the water system and its attendant
units to ensure their maintenance and care in compliance with the laws,
directives and instructions laid down for this purpose. In order to avert
harmful contamination, we urgently recommend the user to ensure
cleaning and care of the water system and the water feature including
the nozzle, and to take all necessary measures to maintain the technical
units, such as pumps, tubing, connectors, under-water lighting, and
nozzles to keep them in functional order in line with safety aspects.
However, the maintenance and care obligation is not limited to the
technical products supplied, but encompasses the entire system.
We also recommend the owner to keep records of the dates when
maintenance and care was carried out, and to document all water
tests made in conjunction with the water feature. The owner is solely
responsible for guaranteeing the safety of the water feature. Use or
maintenance of the units sold and the system are beyond GeoGlobal
Partner's influence. GeoGlobal Partners can only be held liable for
manufacturing faults of smartpond
WARNING
• Risk of electrical shock. To reduce the risk of electric shock, be certain
that the pump and lights are connected only to a properly grounded,
grounding-type receptacle.
• Do not exceed the voltage shown on the pump or light set transformer.
• Always disconnect from the power source before beginning any
maintenance or work on the pump or light set.
• Inspect cord for damage before installation and/or maintenance.
Replace the entire pump assembly or lights/sensor if damage is found.
• Do not remove the grounding pin from the pump power cord plug.
• Do not submerge the transformer and sensor.
• To reduce the risk of fire or injury, keep lamp away from materials that
may burn.
• Risk of electrical shock – This pump and light set has not been
investigated for use in swimming pool or marine areas.
CAUTION
• This pump has been evaluated for use with fresh water only.
• Use a proper power source as indicated on the pump label and
transformer label.
• Keep the cord away from high temperatures or other heat sources.
• Do not let the pump run dry. Pump must be completely submerged for
proper operation and cooling.
• Do not pump heated liquids.
• Operate in freshwater only. Avoid heavily chlorinated water, and water
with high pH levels.
• Do not lift the pump, lights, or transformer by the power cord.
2 VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
units.
®