Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly or operation of product, make sure
all parts are present. Compare parts with package contents list
and diagram. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact Customer Care for
replacement parts.
• Estimated assembly time: 2-3 hours
• Tools required: string, shovel, scissors or other cutting tool, garden
hose
• Additional items: Sand or underlayment, landscaping rocks or stones
LINER INSTALLATION INSTRUCTIONS
Always dig with caution. Call 811 or your local utility company before you
begin digging to locate buried pipes or power lines on your property.
Step 1. Mark the outline of your pond.
Step 2. Dig out your pond removing any
debris or rocks that may damage your
liner.
Add approximately 2 in. of sand to the
bottom of the pond and compress. The
sand will act as a cushion beneath your
pond liner. Alternately, you can install
underlayment in place of the sand.
Step 3. Open the liner and drape it
across the pond area, making sure
to leave at least 10 in. (ideally 1 ft.) of
overlap around the perimeter of the pond.
Begin to fill the pond with water
smoothing out any wrinkles as you do
this.
Step 4. When the pond is full, bury the
excess liner in a small trench around
your pond with stones and rocks for a
professional finish.
4
VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
Scan here for project inspiration
and details!
Full project instructions, instructional
videos, and more product information.
Use your smartphone camera to scan.
1
2
3
4
Publicidad
