Publicidad
Idiomas disponibles
Idiomas disponibles
in accordance with these
instructions, taking into
account the working
conditions and the work to be
performed. Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
h) Keep handles and grasping
surfaces dry, clean and free
from oil and grease.Slippery
handles and grasping surfaces
do not allow for safe handling
and control of the tool in
unexpected situations.
5) Service
a) Have your power tool
serviced by a qualified repair
person using only identical
replacement parts. This will
ensure that the safety of the
power tool is maintained.
VOLTAGE WARNING:
Before connecting the machine
to a power source (receptacle,
outlet, etc.), be sure the voltage
supplied is the same as that
specified on the nameplate of the
machine. A power source with
voltage greater than that specified
for the machine can result in
SERIOUS INJURY to the user, as
well as damage to the machine. If
in doubt, DO NOT PLUG IN THE
EN
6
MACHINE. Using a power source
with voltage less than nameplate
rating is harmful to the motor.
ADDITIONAL SAFETY RULES
Instructions for All Operations
General Safety Warning for
Sanding
a)This tool is used for sanding.
Read all safety warnings,
instructions, diagrams and
stipulations.
b)This tool is not recommended
to be used for some operations
like cutting.
c)Do not use the accessory
recommended or specially
designed by other
manufacturers.
d)The rated speed of the
accessories must be at least no
less than the maximum speed
marked on the tool.
e)The external diameter and
thickness of the accessory must
be within the rated capacity of
the tool.
f) The axle hole size of abrasive
discs must in accordance with
the spindle of the tool.
g)Do not use damaged
accessories. Check the
accessories like abrasive discs
to see whether there is debris
and cracks before every use.
Check whether it is damaged if
Publicidad
