Publicidad
Idiomas disponibles
Idiomas disponibles
(The dimension information is for reference only. Please refer to the actual product.)
INSTALLATION
WARNING
INSTALLATION, FIRST IGNITION AND MAINTENANCE WORK MUST
BE
ACCORDANCE WITH THE INSTRUCTIONS PROVIDED.
INCORRECT INSTALLATION MAY HARD INDIVIDUALS, ANIMALS OR
Advice for
PROPERTY;
the
RESPONSIBLE FOR ANY DAMAGE CAUSED AS A RESULT.
installer
•
This appliance is designed to produce hot water for domestic use.
•
It should be connected to a distribution network for domestic hot water that must be
compatible with its performance and power levels.
•
The use of the appliance for purposes other than those specified is strictly forbidden.
The manufacturer cannot be held responsible for any damage caused by improper,
incorrect and unreasonable use of the appliance or by the failure to comply with the
instructions given in this manual.
•
Installation, maintenance and all other interventions must be carried out in full
conformity with the governing legal regulations and the instructions provided by the
manufacturer. Incorrect installation can harm persons, animals and possessions; the
manufacturing company shall not be held responsible for any damage caused as a
result.
•
The appliance is delivered in a cardboard box. Once you have removed all the
packaging, make sure the appliance is intact and that no parts are missing. If this is
not the case, please contact your supplier.
•
Keep all packaging material (clips, plastic bags, polystyrene foam, etc.) out of reach
of children as it may present a potential hazard.
•
In the event of a fault and/or malfunction, turn the appliance off, turn off the gas cock
and do not attempt to repair it yourself. Contact a qualified professional instead.
Before any maintenance or repair work is performed on the appliance, make sure
you have disconnected it from the electricity supply by switching the external bipolar
switch to the "OFF" position and removing the fuse.
•
All repairs, which should only be performed using original spare parts, should be
carried out by a qualified professional. Failure to comply with the above instructions
could compromise the safety of the appliance and invalidate all liability on the part of
the manufacturer.
Fig. 2(Unit: mm)
PERFORMED
BY
THE
MANUFACTURER
QUALIFIED
PERSONNEL
WILL
ONLY,
IN
NOT
BE
HELD
37
Publicidad
