Braun BWC02 Manual De Instrucciones página 2

English
Getting started
1. Choose a flat location with easy access to a working electric supply to
power up your wireless charger.
2. Peel away the frosted surface protector.
3. Unravel the USB-C cable and plug it into your adapter.
4. Plug the other end of the cable into your BRAUN Wireless Charging Pad.
Charger status
Your BRAUN Wireless Charging Pad has a green LED light at the front that
gives you information about the status of the device.
1. When connecting to the adaptor, the light will flash 3 times showing that
it is ready to use.
2. When a device is placed on the pad, a continuously glowing light
indicates that it is charging. It will dim to a low level after 60 seconds.
3. If the device to be charged is not placed correctly or if there are any
foreign objects on the pad, the light will either turn off or flash
continuously and the device will not be charged properly.
How to safely and properly use your BRAUN Wireless Charging Pad
1. If you're using an accessory with your phone, for example, a phone case,
card wallet...etc., please remove it before charging as it may affect the
charging performance or even cause the charger to malfunction.
2. For maximum charging efficiency, the device must be aligned with the
centre of the charging area.
3. For best charging performance, we recommend using an adapter with
20W power delivery.
4. No metal case or foreign objects should be placed between the device
and the charging pad.
5. High temperature will reduce the charging speed and restrict
power, which is a phenomenon common to all wireless chargers.
It is recommended that charging your device in environments with
temperatures below 25ºC / 77ºF.
Product description
1. LED light
2. Charging pad
3. USB-C input
Product Information
Name: Braun Wireless Charger
Model Number: BWC02
Input: 5V/3A; 9V/2.2A; 12V/1.67A
Output: 5W / 7.5W / 10W / 15W
Operating frequency range: 110-205kHz
Manufacturer: Zeon Ltd.
Manufacturer address: Unit 1, Phoenix Park, Apsley Way, London, England,
NW2 7LN
WARNINGS - Important Safety Instructions
Read all instructions and warnings prior to using this product. Improper use
of this product may result in product damage, excess heat, fire or explosion.
X Do not place metal objects between phone and charger as the charger
may get very hot.
X Do not use or store devices in high-temperature environments, including
heat caused by intense sunlight or other forms of heat, as this may reduce
charge efficiency or reduce lifespan of the product.
X Do not place product in fire or other excessively hot environments.
Exposure to fire or extremely high temperature may cause explosion.
X Do not expose the wireless charger to water. Exposure to water may
result in short circuiting. If short circuiting occurs immediately turn off at
the wall.
X Do not disassemble this product, any modification or disassemble may
result in a void of warranty.
X Use of a power supply or charger not recommended may result in a risk of
fire or injury to persons.
X If this device is accessible to or may be used by a minor, the purchasing
adult agrees to be solely responsible for providing supervision,
instruction, and warnings. Purchaser agrees to defend, indemnify,
and hold Manufacturer harmless for any claims or damages arising from
unintended use or misuse by a minor.
X All products have gone through a thorough quality assurance inspection.
If you find that your device is excessively hot, is emitting odour, is
deformed, abraded, cut, or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use.
Note:
This product is meant for use only in conjunction with the QI compatible
device. Manufacturer is not responsible for any damages to any device
incurred through the use of this product. Manufacturer shall not in any
way be liable to you or to any third party for any damages you or any third
party may suffer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory other than
the appropriate device for which this product is designed. We will not be
responsible for any damages you or any third party may suffer as a result of
misuse of this product as outlined above.
Guarantee
2 year guarantee against material and workmanship defects. The guarantee
is valid in those countries where the unit is officially being sold.
Physical damage is not covered under the Guarantee.
Braun helpline
Should you have a problem with your product, please check your local
service centre at:
www.braun-clocks.com
www.braun-watches.com
or contact +44 808 175 3235 (calls free within the UK) or +44 208 208 1833.
WARNING! This product is covered by the Waste Electrical and Electronic
Equipment (WEEE) Directive. It should not be discarded with normal
household waste but taken to your local collection centre for recycling.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment.
This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
WARNING! Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
UKCA Warning
This device was tested for fixed location. To comply with RF exposure
requirements, a minimum separation distance of 20cm must be maintained
between the user's body and the wireless charger, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories
that do not meet these requirements may not comply with RF exposure
requirements and should be avoided. Use only the supplied or an approved
antenna.
UKCA The declaration of conformity is as follows
This device in compliance with the essential requirements and other
relevant provisions of UK Radio Equipment Regulations (SI 2017/1206);
UK Electrical Equipment (Safety) Regulations (SI 2016/1101); and UK
Electromagnetic Compatibility Regulations (SI 2016/1091). All essential
radio test suites have been carried out.
EU Declaration of Conformity
We ZEON LIMITED UK, manufacturer of Braun Watches, Clocks & Wireless
Chargers under license from the Procter & Gamble Company hereby
declare that model BWC02 conforms to Directive 2014/53/EU. The full text
of the EU Declaration of Conformity can be viewed on our website at www.
braun-clocks.com.
Certain trademarks used under license from the Procter & Gamble
Company or its affiliates.