Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
3604408COM
2 Door Tall Cabinet
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Easy
Assembly Difficulty Meter
Follow Ameriwood Home
B343604408COM0
Tough
You
Tube
Publicidad
Manuales relacionados para Systembuild Evolution 3604408COM
Resumen de contenidos para Systembuild Evolution 3604408COM
- Página 1 3604408COM 2 Door Tall Cabinet B343604408COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1-866-452-4081 (toll free) Monday-Friday 9am - 5pm CST Visit: www.systembuild.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
- Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing,...
- Página 4 Before You Start Please Note: You may need to lightly tap the wood dowels into the holes during your assembly process. systembuild.com...
- Página 5 Board Identification Not actual size 33604408030 Left Panel Right Panel 33604408010 343604408020 Bottom 33604408040 Adjustable Shelf (x2) Shelf 33604408060 33604408050 Left Door 33604408060 This part is made of paperboard Right Door construction. It is not made from 33604408070 wood, but is required for the Back Panel assembly of your unit.
- Página 6 Board Identification Not actual size systembuild.com...
- Página 7 Part List Actual Size (x8) (x8) (x40) (x8) (x4) #A22700 #A22710 #A12105 #A21670 #A23030 cam lock cam bolt 7/16" pan head screw confirmat screw wood dowel (x8) (x2) (x10) (x4) #A80250 #A11210 #A12810 #A17400 shelf support 3/4" pan head screw 1"...
- Página 8 Part List Not Actual Size (x1) (x1) #A55055 #A84050 lock safety bracket (x1) (x6) (x5) #A55410 #A65615 #A44710 slide bolt hinge foot (x2) (x4) #A55010 #A92550 handle base plate kit systembuild.com...
- Página 9 STEP 1 (x8) systembuild.com...
- Página 10 STEP 2 Quick Assembly (x4) (x4) Proper orientation of CAM LOCK systembuild.com...
- Página 11 STEP 3 Quick Assembly (x4) (x4) Proper orientation of CAM LOCK systembuild.com...
- Página 12 STEP 4 Finished Edges Face Up systembuild.com...
- Página 13 STEP 5 Finished Edges Face Up systembuild.com...
- Página 14 STEP 6 (x4) Finished Edges Face Up systembuild.com...
- Página 15 STEP 7 (x10) (x5) systembuild.com...
- Página 16 STEP 8 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. (x50) Carefully turn the unit over on its front side. Position back panel as shown. Align squarely with all edges and nail straight into back edges as shown. Raw Surface Shown Assure that our unit is square.
- Página 17 STEP 9 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
- Página 18 STEP 10 (x40) (x4) systembuild.com...
- Página 19 STEP 11 (x1) (x1) (x1) (x3) (x2) (x2) systembuild.com...
- Página 20 STEP 12 (x1) (x1) (x3) (x2) systembuild.com...
- Página 21 STEP 13 When mounting the left door (G), be sure the slide bolt (14) is positioned in the up position. systembuild.com...
- Página 22 STEP 14 Insert the barrel of the lock (11a) into the hole as shown. With the teeth of the lock nut (11c) facing the door surface, tighten the lock nut (11c). Position lock bar (11b) as shown and attach to the barrel of the lock (11a) with the lock screw (11d).
- Página 23 STEP 15 To lock your cabinet: Shut the left door (G), press the slide bolt (14) down into the hole in the bottom (D). Close the right door (H) and turn the lock (11) so the lock bar rotates to the left and behind the left door (G). systembuild.com...
- Página 24 STEP 16 (x8) Finished Edges Face Out systembuild.com...
- Página 25 STEP 17 Door Adjustment To adjust the vertical height: Loosen the screws "A" on both hinges. They are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. To adjust side to side: Loosen the screw "C"...
- Página 26 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 0 lbs 0.0 kg 40 lbs 18.1 kg 50 lbs 22.7 kg 40 lbs 18.1 kg 50 lbs 22.7 kg...
- Página 27 Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
- Página 28 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
- Página 29 Español Página 16 ¡IMPORTANTE! EL PANEL TRASERO ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE SER INSTALADO CORRECTAMENTE. Gire con cuidado la unidad sobre su lado frontal. Coloque el panel trasero como se muestra. Alinee todos los bordes y clávelos directamente en los bordes traseros como se muestra.
- Página 30 Español OPCIÓN 2: Fijación en la pared de yeso Ubique su unidad en el lugar deseado contra una pared y marque la pared a través del soporte de seguridad, luego mueva su unidad a un lado. Perfore un agujero de 3/16" de diámetro (5mm) en la pared.
- Página 31 Español Página 26 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas - no coloque un televisor sobre muebles. Este mueble no está...
- Página 32 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à...
- Página 33 Français Page 16 IMPORTANT! LE PANNEAU ARRIÈRE EST UNE PARTIE STRUCTURELLE DE CET APPAREIL ET DOIT ÊTRE INSTALLÉ CORRECTEMENT. Retournez soigneusement l'appareil sur sa face avant. Positionnez le panneau arrière comme indiqué. Alignez d'équerre tous les bords et clouez droit dans les bords arrière comme indiqué.
- Página 34 Français OPTION 2 : Fixation dans les cloisons sèches Placez votre appareil à l'endroit souhaité contre un mur et marquez le mur à travers le support de sécurité, puis mettez votre appareil de côté. Percez un trou de 3/16 de pouce (5 mm) de diamètre dans le panneau mural.
- Página 35 Français Page 26 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. AVERTISSEMENT : Risque de blessure corporelle - ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé...