Siyata VK7 Guía De Instalación Rápida página 6

Preplanned Accessory Positioning
Positioning of all accessories must be planned in advance before
installation begins.
 Ensure that no wire braids go through locations where Device
accessories are to be installed.
 Ensure that any parts of the Device will not interfere with the
vehicle or its accessories' operation
Plan Device and mounting bracket Positions
The best way to determine the Device's position to

the customer's full satisfaction is to locate it when
the customer is beside you and obtain his/her
Note!
approval.
 Please ensure the Device's location does not interfere
with the vehicle or its accessories operation: it should not
interfere with opening the glove compartment or ashtray,
should not prevent access to the lighter, moving the gear
stick, operating the hand brake etc.
 If the Device is installed near the car windshield/dash board,
ensure that it does not interfere with the visual field.
Do not install the Device in front of the vehicle's air

bag. This restriction must be adhered to, as in the
case of an emergency the air bag blows up and can
Warning!
fail to work properly.
 Ensure the surface on which this Device is installed is
sufficiently strong to carry the weight and pressure which
would be exerted on it.
6