Publicidad
Arrangement (continued)
Secure a clearance of 50cm or greater when installing the projectors side by side.
As for the required clearance not shown in the figure below, follow the installation
mentioned above.
Secure a clearance of 30cm or greater between the intake vents and walls
when installing the projector in portrait mode. As for the required clearance not
shown in the figure below, follow the installation mentioned above.
(continued on next page)
LWU720i/LHD720i/LWU620i
Setup Guide
50cm or greater
Intake
vents
30cm or greater
7
020-001337-01 Rev. 1 (10-2017)
Publicidad
