Magiqtouch Controller Operation; Operating Your Cooler; Magiqtouch Controller Settings Menu; About Appliance - Seeley LCQ Manual Del Usuario

Hello and congratulations
on purchasing a Seeley
evaporative cooler
At Seeley International we manufacture
evaporative coolers from the highest quality
materials, and we have designed the product
to provide many years of economical, trouble-
free cooling.

OPERATING YOUR COOLER

To provide efficient cooling or ventilation the
building must have sufficient exhaust openings
to the outside of the building.
To assist air flow, open windows and doors that
are farthest from the outlet vent in each room.
In these rooms, provide an exhaust opening 2
times the vent size of the room.
Where the design of the building prevents
adequate exhaust, consideration should
be given to the provision of mechanical
extractions, such as an exhaust fan.
There are three main ways that an evaporative
cooler can operate to provide cooling comfort.
• The cooler can be set to cool at a constant
fan speed, without reference to the current
temperature.
• The cooler can be given a temperature
target, in which case it will vary the fan
speed in order to get as close to the
target as possible. (Note! Humid weather
conditions may limit the temperatures that
can be achieved).
• The cooler can be set to a fan only mode,
providing air circulation only.
MAGIQTOUCH CONTROLLER
OPERATION
Refer to the Owner's Manual supplied with the
controller for operating instructions.
MAGIQTOUCH CONTROLLER
SETTINGS MENU
Your MagIQtouch Controller contains a settings
menu, which gives you access to information
about your evaporative cooler and to extra
functions including:

About Appliance

Access information about the appliances
installed in your system.

Min/Max Set Temperature

You can change the minimum and maximum
temperature displayed on your slider,
depending on what temperature range
you prefer your system to work within.

Night Quiet Mode

Restrict fan speed over the night time period
for a quiet night's sleep.

Manual Drain

This will turn the cooler off and drain the tank.

Pad Flush

This will turn the cooler off and run the pumps
for a specified time. Use this feature to flush
the cooler pads.

Drain And Dry

This option allows you to nominate a time each
day when the cooler will drain the tank and run
the fan for 1 hour.

Autoclean

(Breezair
Select the preferred cleaning interval (50 / 100
/ 200 hrs). At 8.00am after the selected running
hours has been reached, the cooler will drain
the tank, fill with fresh water and operate the
pump for 5 minutes. When complete, drains
the tank and returns to previous operation
mode.
Note! There are some settings, which are
locked and are only for installers or service
technicians.
ILL1582-A
LCQ / LCS / LCQI / BMQ / CPQ / TBQ / TBS / TBQI / TBSI |
coolers only)
®
1