Publicidad
Idiomas disponibles
Idiomas disponibles
EN
8.4
INSTALL THE LIGHT HEAD
•
Battery tools are always in operating condition.
Therefore, always turn off the light when the light is not
in use or when carrying the machine at your side.
1. Align the bolt the the hole (on the bracket).
2. Insert the bolt into the hole until it kocks into place and
then tighten them with knobs.
3. Do the same operation on the other side.
8.5
REMOVE THE LIGHT HEAD
1. Unlock the right and left knobs.
2. Remove the bolts.
9
OPERATION
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
WARNING
WARNING
English
9.1
START THE MACHINE
1. Install the battery pack or connect the power source.
2. Press the ON/OFF switch to turn the machine on. The
machine will be turned on at maximum brightness.
3. To reduce the brightness, press the ON/OFF switch again.
Low voltage operation
When the battery pack is less than 5%, the machine will flash
three times with a brightness of 500 lumens.
•
Do not continue to press the ON/OFF switch after the
machine has automatically switched off. The battery
can be damaged.
9.2
STOP THE MACHINE
1. Press the ON/OFF switch to turn the machine off.
8
WARNING
Publicidad
