Uline H-5714 Manual Del Usuario página 2

3. Embed four long camlock pins in each of the two
bottom box panels with plastic inserts, and connect
to the other two bottom box panels to form a box
stand. (See Figure 3a) Embed provided camlocks into
the open holes on each panel. Insert screwdriver into
the appropriate eight embedded camlocks and turn
clockwise to secure panels together. (See Figure 3b)
4. Set the bottom box stand on top of the eight long
camlock pins on the bottom table. Insert screwdriver
into the remaining eight embedded camlocks at
the bottom and turn clockwise to secure box stand
to the table. (See Figure 4)
PAGE 2 OF 9
ASSEMBLY CONTINUED
5. Embed eight short camlock pins to the bottom of
Figure 3a
6. Embed four long camlock pins to the top of the
Figure 3b
Figure 4
the middle table, and set on top of the bottom box
stand. Turn the eight outside screws clockwise to
secure the middle table. (See Figure 5)
middle table. (See Figure 6)
Figure 5
Figure 6
0621 IH-5714