Publicidad
Idiomas disponibles
Idiomas disponibles
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
3. ADDITIONAL SAFETY WARNINGS FOR DRILLS AND SCREW DRIVERS
a) Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
b) Hold power tool by insulated gripping surfaces when. performing an operation where the cutting
accessory or fastener may contact hidden wiring.
Cutting accessory and fasteners contacting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an electric shock.
c) Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
d) Use appropriate detectors to determine if utility lines are hidden in the work area or call the local
utility company for assistance. Contact with electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Penetrating a water line causes property damage.
e) Switch off the power tool immediately when the tool insert jams. Be prepared for high reaction
torque that can cause kickback. The tool insert jams when:
- the power tool is subject to overload or.
- it becomes wedged in the workpiece.
f) Hold the machine with a firm grip. High reaction torque can briefly occur while driving in and
loosening screws.
g) Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more
secure than by hand.
h) Always wait until the machine has come to a complete stop before placing it down. The tool
insert can jam and lead to loss of control over the power tool.
4. MACHINE INFORMATION
Intended use
This cordless drill is intended for driving in and loosening screws as well as for drilling in wood,
metal and plastic.
5
Publicidad
