VENTE-UNIQUE CALBUCO BG-40B Manual Del Usuario página 19

Operation
Read and understand this entire owner's manual, including all safety information, before
plugging in or using this product. Failure to do so could result in electric shock, fire, serious
injury, or death.
Power
Plug the power cord into a AC 220-240 Volt outlet (see IMPORTANT SAFETY INFORMATION on Pages 2 and 3).
Make sure the outlet is in good condition and that the plug is not loose. NEVER exceed the maximum amperage
for the circuit. DO NOT plug other appliances into the same circuit.
Methods of Operation
This electric fireplace can be operated by the CONTROL PANEL/TOUCH PANEL, or by the battery-powered
REMOTE CONTROL.
The operation and functions of the two methods are the same.
Before operating, please review the IMPORTANT SAFETY INFORMATION on Pages 2 and 3, and heed all
warnings.
Touch Panel / Remote Control Operation
BUTTON
ON: Enables control panel functions and remote
control. Turns on flame effect.
OFF: Disables control panel functions and
remote control. Turns off flame effect.
POWER
TIMER button: Controls timer settings to turn off
fireplace at selected time.
Settings range from 0.5 hours to 8 hours.
TIMER
FLAME button: Makes flame effect dimmer and
brighter.
NOTE: Flame effect stays on until power button
is turned off. Flame effect must be on for heater
to turn on.
FLAME
FUNCTION
18
Remote Control
Touch Panel
ACTION & INDICATION
1. Press once. Indicator light turns on. Power
turns on. All functions enabled.
2. Press again. Flame effect turns off. Unit
goes to standby. All functions turn off.
1. Press once. Indicator light turns on. Timer
is set to 0.5 hours.
2. Press again until desired setting is
reached.
1. Press once. Flame brightness effect gets
changing.
2. Press again. until desired setting is
reached.