Protool NRP 90 Manual De Instrucciones página 10

All manuals and user guides at all-guides.com
Type reference
Rated voltage
Vertical depth of notching adjustable
Depth of notching with the flat cutting head adjustable
Bevel angle adjustable
Cutting tool dimensions:
Rafter-seat cutting head (cylindrical)
Notch cutting head (flat)
Motor power:
Motor specification
Rated input
Output
Protection Class
Plug
Speed: no-load
rated load
Guide plate
Weight of the electric tool
Operating controls & Description
1. Hinge
2. Hinge
3. Guide plate
4. Front handle
5. Main handle
6. Mains switch
7. Pendulum safety guard, internal
8. Swiveling handle
9. Chip deflector
10. Pendulum safety guard, external
11. Sliding ruler
12. Hand wheel
13. Parallel fence
14. Adjustable pointer
15. Locking lever for depth adjustment
16. Hexagon key
17. Scale fixing screw
18. Depth scale
19. Hand screw
20. Locking lever for angle adjustment
21. Locking lever for angle adjustment
22. Guide rail
23. Locking pin
24. Cutting head fixing screw
25. Clamping flange
26. Brush cap
27. Carbon brush
28. Lock-off button
The accessories shown or described in this Operating
Manual may not be included as a part of delivery.
GB
NRP 90
~
230 V
max. 85 mm
max. 90 mm
0° – 60°
∅ 150 x 115 mm
∅ 260 x 50 mm
2 800 W
1 750 W
II /
3 400 min –1
2 900 min –1
522 x 315 mm
22,5 kg
Intended use
The notcher is designed solely for milling solid wood.
This electric tool must be guided by two people over
a safely supported and fixed workpiece.
The user is solely liable for damage and accidents caused
by improper use of the product.
For safe work with this electric tool and prevention of injury,
it is imperative to follow all generally accepted safety
principles and regulations for prevention of accidents,
and read the enclosed „Safety instructions" thoroughly.
The manufacturer disclaims liability for damages caused
by unauthorized modifications or using other than
the supplied or specified accessories with the electric tool.
Safety instructions
This electric tool may only be used, maintained and
repaired by the people who have received the relevant
instructions. These people must have reached the
minimum age legally required. For safe work and
familiarizing with all the remaining risks, they must
have read and understood this Operating Manual.
1. For maximum safety of work with this electric tool,
read this Operating Manual carefully and observe all
the instructions given herein.
2. Follow the safety instructions supplied separately
as a part of delivery with each electric tool.
3. The electric tools shall not be used in damp or wet
locations, outdoors in the presence of rain, fog, snow,
or if there is a risk of fire or explosion.
4. Check the power supply cord and plug before each
use of the electric tool. Have any defect repaired
10
NRP 90
~
400 V 3-phase
max. 85 mm
max. 90 mm
0° – 60°
∅ 150 x 115 mm
∅ 260 x 50 mm
Asynchronous 3-phase
3 200 W, S6 – 15 %
Protection Class IP 44
round system 16 A, 5-pin
3 400 min –1
522 x 315 mm
28,5 kg