Publicidad
Depth
Control Rod
Chuck
Auxiliary
Handle
1. Turn the auxiliary handle in a
clockwise direction while released
so that the opening in the mount
gets through freely over the chuck.
2. Insert the hammer drill head
through the auxiliary mount.
3. Insert the depth control rod into
the mount orifice.
4. Rotate the auxiliary handle
together with its mount until is set
in the right position to operate the
tool. The auxiliary mount is secure
when the handle notches assemble
in the gearbox.
5. Turn the auxiliary handle to
firmly set the mount onto the
hammer drill head.
6
ENGLISH
Mechanical
Impact-Rotation
Speed
Selector
Selector
Rotation
Selection
Button
Chuck
Key
Assembly
Depth
Control Rod
3
Steps 1 & 2
Mount
Auxiliary
Handle
Parts
Speed
Control
Switch
Power Cord
Protector
Chuck Key
Holder
4
5
Continuous
Operation Button
Handle
Power
Cable
Publicidad
