DHC BT2400 Pro Manual Del Propietário página 2

MAIN FEATURES
1. 6V and 12V Starter Battery Test. (including Start-Stop Batteries)
2. 12V and 24V Cranking & Charging System Test.
3. Built-in Wi-Fi for test report upload to mybatteryexpert.com and OTA firmware
update.
4. Built-in barcode scanner, supports 1D and 2D barcodes.
5. Precise temperature compensation.
6. Print out test results.
7. Optional amp clamp and voltage probe.
IMPORTANT
1. Suggested operation range 0
temperature.
2. Radio frequency range: 2400 ~ 2483.5 MHZ
3. Maximum radio frequency transmitted power: 20.5 dBm
4. FCC ID: 2AC7Z-ESPWROOM02D
WARNING
WARNING: This product can expose you to chemicals including arsenic, which is
known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov.
1. Working in the vicinity of a lead acid battery is dangerous. Batteries generate
explosive gases during normal battery operation. For this reason, it is of
utmost importance, if you have any doubt, that each time before using your
tester, you read these instructions very carefully.
2. To reduce risk of battery explosion, follow these instructions and those
published by the battery manufacturer and manufacturer of any equipment
(32 ) to 50 (122 ) in ambient
2