How To Use; Bluetooth Connection; Change Mode - VORAGO KSP-301 Guía Rápida

HOW TO USE

Device charging
• Plug the power adapter into an electrical outlet, let it charge
for approximately 3 to 4 hours. Once fully charged unplug your
device. The rear panel has a battery status indicator, this will
indicate when the charge is complete.
If the use will be prolonged and an available power outlet is
available, use your device connected directly to the power to
avoid battery wear.

Bluetooth connection

Once the horn is turned on, press the MODE button to switch to
bluetooth mode.
Activate the Bluetooth of your phone and in configuration
search among the available devices "KSP-301" and select it
for pairing. If you need a Bluetooth connection password use
0000, only if necessary.
Once p aired, a n a udible i ndication w ill b e h eard f or c onfirmation.

Change mode

If you want to switch between the different modes available,
press the MODE button continuously until the display indicates
your preference
Bluetooth / SD / USB music mode
1. To play your music on your phone while it is connected
via Bluetooth, press the play / pause button with a quick
touch ( )
2. To advance to the next song press the button with
one touch and to go back to the previous song press the
button .
3. To control the horn volume adjust the rear knobs to your
preference.
4. If you answer a call while you are playing your music in
Bluetooth mode, it will pause and continue after the call
ends.