Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Appliance will not operate
• Plug is not fully inserted into the wall outlet
• Blown fuse or circuit breaker
• The fi lter may not be correctly installed
Insuffi cient air purifi cation
• Air fi lter is dirty or needs to be replaced
• Blocked air fl ow
• Appliance size is too small for application
• Ensure that all packaging has been removed from the fi lter
Appliance will not resume functioning after cleaning the fi lter
• Press and hold the PM2.5 button for 3 seconds to reset the fi lter
Odors
• Replace the air fi lter
ERROR CODES
E1 - fi lter installation error; check that all air fi lters are correctly installed
E0 - hardware fault
Eu - sensor fault
E3 - fan speed fault
If the codes E0, Eu or E3 appear on the display, unplug the air purifi er
and allow it to sit undisturbed for 5 minutes. If the error code persists
when the air purifi er is plugged in, please contact a local service depot.
DISPOSAL
This appliance should not be treated as regular household waste. Check
for local regulatory compliance regarding the approved and safe
disposal of this appliance.
11
Publicidad
