Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
FILTER INSTALLATION
Ensure that the fi lter is properly installed before using the appliance.
Ensure that the air purifi er is unplugged when installing the fi lter.
1. Remove the air inlet grille.
2. Remove the pre-fi lter by pressing the U-shaped buckle and pulling
outward.
3. Remove the true HEPA fi lter.
4. Remove the packaging from the fi lter.
5. Install the fi lter.
6. Replace the pre-fi lter by aligning the bottom and pressing the top
inward until it clicks.
7. Replace the air inlet grille by aligning the bottom and pressing the
top inward until it clicks.
8. Repeat this process on both sides of the air purifi er for both true
HEPA fi lters.
1
5
2
6
3
7
4
4
8
Publicidad
