Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
OPERATING MODES
This air purifi er has three modes:
auto, sleep and turbo. The mode
indicator light will show which
mode is currently active. Pressing
the mode button will cycle through
the options: auto, sleep and turbo.
AUTO
The air purifi er will default to
running in auto mode. In auto
mode, the air purifi er will run the
fan at very low speed so that it is
able to take readings from the air
while remaining extremely quiet.
SLEEP
Press the mode button to activate
sleep mode. This mode will turn
off the lights and indicators on the
control panel except for the sleep
light and will run the fan at very
low speed to ensure the air purifi er
is as quiet as possible during
sleeping hours.
TURBO
Press the mode button to activate
turbo mode. This mode will run the
fan at very high speed to purify
a large amount of air in a short
period of time.
FAN
The fan can be manually set to
low, medium or high. Press the fan
button to set the desired fan speed.
The fan indicator light will show the
current speed setting.
CHILD LOCK
Press and hold the fan speed
button and the mode button at the
same time for 3 seconds to engage
the child lock. The unit will chime
and a lock icon will illuminate on
the control panel next to the pre-
fi lter check light. The buttons on
the control panel will not function
when the child lock is engaged. If
any buttons are pressed, the lock
icon will fl ash. Press and hold the
fan button and the mode button
at the same time for 3 seconds to
disengage the child lock.
6
Publicidad
