Publicidad
Idiomas disponibles
Idiomas disponibles
Service:
♦ Make sure that the appliance is serviced only by special-
ist personnel, and that only original spare parts or acces-
sories are used to replace existing parts/accessories.
♦ Do not attempt to disassemble or repair the appliance by
yourself in order to avoid a hazard.
♦ CAUTION: There is a risk of fire if the appliance's clean-
ing is not done according to these instructions.
♦ Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
DESCRIPTION
1. Guard bracket
2. Mist Vent
3. Front fan guard
4. Blade bracket
5. Fan blade propeller
6. Guard bracket
7. Rear fan guard
8. Fan head/motor
9. Flexible Mist hose
10. Fixing screw
11. Housing
12. Pedestal heavy round base
13. 4 castors
14. Floor bracket
15. Water tank cover
A Timer display (hours)
B"Sleep" wind mode display
C"Natural" wind mode display
D"Medium" wind speed 2 display
E"Light" wind speed 1 display
F"Light" Mist volume 1 display
G"Normal"wind mode display
H Oscillation display
I "Strong" wind speed 3 display
J Timer indicator light
K "Medium" Mist volume 2 display
L "Strong" Mist volume 3 display
M Mist volume settings
O Power ON/OFF
P Wind mode settings
Q Fan Speed settings
R Oscillation ON/OFF
S Timer ON/Timer OFF settings
(Original instructions)
1.1 Mist ON / OFF & Mist volume settings
1.2 Wind Speed settings
1.3 Timer ON /OFF, 1-12 hours
1.4 Wind Mode Settings
1.5 Fan ON / OFF
1.6 Oscillation ON/OFF
INSTALLATION
♦ Be sure to remove all packaging material from inside the
appliance.
♦ Ensure that the fan is switched off and unplugged from
the supply mains before to start any installation or
assembly operation.
♦ Do not remove the support feet or wheels from the
appliance.
♦ Ensure that the appliance is level with respect to the
floor.
♦ Do not cover or obstruct any of the openings of the
appliance.
♦ The plug must be easily accessible so it can be discon-
nected in an emergency.
♦ The appliance should be used with its base fitted.
♦ The appliance should be used with its wheels attached.
Instructions for replacing the remote con-
trol battery (FIg 3)
♦ Non-rechargeable batteries should not be recharged.
♦ Rechargeable batteries should be removed from the
product before charging.
♦ Different types of batteries and new and used batteries
should not be mixed.
♦ Batteries are to be inserted with the correct polarity
♦ Exhausted batteries should be removed and safely
disposed of.
♦ If the appliance is to be stored unused for a long period
then batteries should be removed.
♦ The supply terminals should not be short-circuited.
♦ Open the battery cover of the remote control, take two
AAA 1.5V batteries and put them in (the end with the
spring in the remote control is the negative pole). The
positive and negative poles of the battery should be
installed corresponding to the positive and negative
poles of the remote control.
Assembling the base:
♦ To fix the base into the appliance, place the appliance
face down.
ENGLISH
7
Publicidad
