Wiesenfield WIE-CCD-600 Manual De Instrucciones página 26

Kit contents
a - Controller
b - Controller cover
c - Self-tapping screws for mounting guides
d - Self-tapping screws for mounting the controller (1 pc. spare)
e - M4x30 flat head screws
f - Plug to cover the light sensor
g - Guides
Note: The necessary tool for assembly will be a screwdriver (not included).
Place of installation:
• The controller should be mounted on the outside wall of the poultry house
(the controller has a light sensor).
The controller should be installed above the hen entrance.
•