PURE ADVANCE FLEX Manual De Instrucciones página 17

2.7.3 Speed
The current speed is shown by the large digits in the centre of the display.
The throttle will not engage at speeds below 3km/h. If less than 3km/h shows on
the display, push off the ground until 3km/h, after which the throttle will engage
with a thumb press.
2.7.4 Units
By default, the e-scooter will display metric units (km/h). To switch to imperial
units (mph), go to 'settings' in the mobile app (see 2.5) when connected
via Bluetooth.
User Manual | EN
Rider pushes
off to get up to
3km/h
Stop
mph setting
via App
km/h setting
via App
Throttle
applied
Throttle
released
17