PURE ADVANCE FLEX Manual De Instrucciones página 22

Tightening the latches and levers
Ensuring your latches and levers are
properly tightened helps ensure they
do not become loose over time. If a
latch or lever is loose, follow these
steps to tighten them.
To adjust the stem and frame latches
First loosen screw 1 using a 3mm hex
key. Next adjust the tightness of the
latch by turning screw 2 a 1/8th turn
at a time using a flat head screwdriver.
If it is too tight, rotate the screw anti-
clockwise by a 1/8th turn to reduce
the tightness.
Important - When you are happy the
clamping force is strong enough to
ensure the latch remains tight when
closed, tighten down screw 1 to lock in
your changes.
To tighten the steerer lever
First move the lever from the closed
to open (loose) position. Next tighten
the steerer lever by rotating the screw
1 clockwise by 1/8th turns with your
hand, to increase the tightness. If it is
too tight, rotate screw 1 anti-clockwise
by a 1/8th turn to reduce the tightness
until at the right setting.
Important – When you are happy with
the tightness, close the lever and
check that the steerer cannot move up
or down before riding.
For maintenance support and advice, please contact us via our website
www.pureelectric.com
22
Pure Advance Flex