PURE ADVANCE FLEX Manual De Instrucciones página 9

2 HOW TO USE YOUR E-SCOOTER SAFELY
2.1 Riding instructions
1. First, turn on your e-scooter
by pressing and holding the
central multifunction button
for 2 seconds. The display will
switch on.
2. To start riding, lift up the
kickstand, place one foot on
the footpad and push against
the floor with your other foot to
propel you forwards.
3. After you've pushed yourself
forwards, press the throttle with
your thumb steadily to start
accelerating. You will need to
achieve a speed of 3km/h before
the throttle will engage.
Quick tips to get going:
Handlebar
fold-down buttons
Brake
Throttle
Indicators
1. The controls
Use your right thumb to operate
the throttle and your left hand
for the brake and indicators.
User Manual | EN
4. Steer by turning the handlebars
left and right. The steering
mechanism is sprung-loaded to
help it return to centre, and to
make it easier to steer during
prolonged use.
5. You can slow down the e-scooter
by pulling the brake lever. Braking
activates both the electrical rear
brake and the front drum brake.
6. To come to a stop, slow to almost
a standstill. Then, place one foot
on the ground, leaning slightly
onto that foot as you come to a
complete stop.
2. Select mode
Switch on and double press the
multifunction button to select
your riding mode.
3. Push to start
Simply push off the ground,
then press the throttle to
activate the motor.
9