Songmics GSA253 Instrucciones De Montaje página 18

Product specifications
Product name
Anthracite
Clamp Awning
Grey/Beige
Please note
The crank mechanism of awning has no stopper to limit the rotation (manual operation only). Ensure the awning is always fully retracted to
avoid damage to the fabric. The cloth must be clamped tightly!
Advice for
maintenance
Please check and ensure that all screws are tightened at the beginning of each awning season. Clean the frame with soap water once a year.
In case you need to store your awning, ensure it has been cleaned and dried; choose a dry and ventilated storage room to avoid mildew and
stains.
For a longer lifespan, clean it with a mild detergent.
Remove mildew and damp stains with mild soap, never use detergents that contain solvents, as they may bleach the fabric and damage the
weave.
To avoid potential damages, never use alkaline or acidic detergents or steam jets to clean the fabric. To avoid wearing out of the material, it is
important to avoid water puddling on the awning by draining the rain water.
The following is an overview of common situations. These are not considered faults as long as they do not occur in an excessive number of
times.
The fabric might sag due to its own weight.
Manufacturing technology might result in different areas of the fabric to have slightly different colour.
Shading is merely an optical appearance. It results from different refraction and folded areas.
Threads may not run in straight lines which is due to assembly.
General notes
on the awning fabric
Awning fabric is a high performance products. However, even with today's technology and because of environmental protection
requirements, they are not always perfect. Despite optimal production and processing techniques, certain defects appear in the cloth, which
18
Colour Size
250 x 130 cm
300 x 130 cm
350 x 130 cm
Detailed specifications
Aluminum roller: φ38 mm
Front bumper: φ24 mm
Pole length：130 cm
Adjustable height：2-3 m
The distance between each pole hole：10 cm
Fabric: 280 g/m² polyester + PU coating
Steel hand crank: 950 cm
Note: Except that the roller is made of aluminum alloy, other metal
materials are made of steel.
Gearbox: 1:5