Publicidad
Idiomas disponibles
Idiomas disponibles
Crivit CEK 29 B4
8.3 Cleaning
DANGER! Disconnect the connecting cable before
cleaning the power source. There is a risk of electric shock!
DANGER! In order to avoid risk, ensure that no liquids
enter the lid.
Remove the lid [2] for cleaning by opening it as far as it will go and then pressing it from the right
rear recess [10].
To clean the lid [2], use a slightly damp cloth and never use solvents or cleaning agents that react
with plastics. You can carefully clean the ventilation slots in the lid [2] with a soft brush.
Clean the inside of the cool box using detergent and then clean water. Dry the cool box
thoroughly.
After cleaning, insert the lid [2] again by bringing it into an upright position to the cool box. Now
first insert the lid [2] into the left opening and then press it into the right recess [10].
9. Storing the device when not in use
If you do not want to use the cool box for a long period of time, please remove all items from the
cool box. Disconnect the cool box from the mains and store the connecting cables in the cable
boxes [3], [4]. Make sure that the cool box is stored in a clean, dry place away from direct
sunlight. Allow the lid [2] to stay open when storing the cool box to ensure good ventilation. The lid
[2] can be fixed open using the locking mechanism [9].
36 - English
Publicidad
