SmartGyro Xtreme Pro Manual De Usuario página 24

Basic operations
1. Display and accelerator
1.1 Power button
1.1 With the skate off, press the on / off button for 3 seconds and it will be on, the device will turn off automatically after 5 minu-
tes of inactivity.
1.2 With the skate on, press the on / off button to turn on the backlight, and once lit, press again to turn it off.
1.3 With the skate on, press the on / off button for 3 seconds to turn off the device.
2. Operating modes
2.1 With the skate on, press the "Mode" button to switch between the 3 operating levels.
2.2 When level 1 is selected, the engine will maintain a 30% performance at maximum speed, reach about 9 Km / h.
2.3 When level 2 is selected, the engine will maintain 80% performance at maximum speed, reach about 18 Km / h.
2.4 When level 3 is selected, the engine will maintain 100% performance at maximum speed, reach about 25 Km / h.
3. Other functions
3.1 Fault codes
In the on state and if the skate has an anomalous behavior, error codes will be displayed on the display screen, if this occurs,
please contact our support.
3.2 6 The battery indicator is shown as a grid with a percentage of charge indicator.
4. Note
The display shown is only a reference, the information that appears in it is only informative.
5. Brake control
5.1 The brake cuts the motor power. When you need to brake or stop the device, you can do so by using the brake lever that
operates the rear disc. Try not to brake sharply to avoid falls.
5.2 SmartGyro Xtreme Pro has a buzzer that lets you alert other nearby pedestrians of its presence. Always use the buzzer to warn
and prevent possible collisions or falls.
manual xtreme pro.indd 23
Xtreme Pro- Manual
smartgyro.es 23
20/06/2018 11:13:04