Power Supply - Maytronics Dolphin PROX 2 Gyro Instrucciones De Manejo

EN

6. POWER SUPPLY

Digital "Switch-Mode" Power Supply with full filter bag and delay indicator.
• Input - 100-250 AC Volts
• 50-60 Hertz
• 180 Watt
• Output - <30 VDC
• IP 54
Full filter bag indicator
<30 VDC; IP 54
On/Off switch
Full filter bag indicator and Reset button
The power supply is equipped with a filter bag status indicator.
The red LED indicates two filter conditions.
When blinking - The filter is partially blocked.
•
When lighted - The filter is blocked and must be emptied and cleaned.
•
If the LED does not turn off after the filter bag had been emptied and cleaned, press the RESET button
while the robot is working.
Delay indicator
The power supply is equipped with a Delay indicator that indicates if the Delay option is activated
(through the remote control unit).
8
Delay indicator
Reset button
Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions