Bissell CROSSWAVE CORDLESS MAX DELUXE 2593 Serie Manual página 10

After-Cleaning Care
(continued)
Remove the top of the tank
7.
by grabbing the sides
of the filter and pulling up.
Pull strainer tab up and out
of the tank to separate hair
and debris from dirty water.
Throw debris into the trash.
Wash filter and screen
10.
with warm water and mild
detergent. Rinse the bottom of
the tank cover.
Replace the brush roll
13.
window by lining up tabs on
the edges of the foot. Press
the window back so it "clicks"
into place.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
WARNING
electrical outlet before performing maintenance or troubleshooting on the dock.
10 BISSELL.com
Pour dirty water into the
8.
sink and rinse the tank.
Leave all parts out to dry
11.
before reassembling.
Reassemble the dirty
14.
water tank. Angle tank back
into the body of the machine.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
Remove filter from the top
9.
of the tank by pulling it up.
Place the end of the brush
12.
into the right side of the foot.
Press the tab of the brush
down so it locks into place.
Insert the bottom of the
15.
tank first. Pivot the top toward
the machine until it "clicks"
into place.