3. The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14- gauge cord can carry a higher
current than a 16- gauge cord.
4. When using more than one extension cord to make up the total length, make sure each cord contains at least the minimum wire
size required.
5. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the
required minimum cord size.
6. If you are using an extension cord outdoors, make sure it is marked with the suffix "W-A" ("W" in Canada) to indicate it is accept-
able for outdoor use.
7. Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or
have it repaired by a qualified electrician before using it.
8. Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.
SIMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
Nº Load Revolutions
Per Minute (RPM)
11