Tripp-Lite PDUMH30AT Manual Del Propietário página 4

Feature Set Overview
Model Number
PDUMH30AT
PDUMH30ATNET
PDUMNH30AT2
PDUMH30HVAT
PDUMH30HVATNET
PDUMNH30HVAT2
PDUMH32HVAT
PDUMH32HVATNET
PDUMNH32HVAT2
Installation
Mounting the PDU
The PDU supports 2U rack mounting or surface mounting (e.g. on a wall, on a desk
or under a counter).
Note: The user must determine the fitness of hardware and procedures before mounting. The PDU and
included hardware are designed for common rack and rack enclosure types and may not be appropriate for all
applications. Exact mounting configurations may vary.
2U Rack Mounting
Attach the included mounting
1A
brackets to the sides of the PDU
with the included screws.
After attaching the brackets,
2A
position the PDU in the rack and
install four user-supplied screws
through the bracket ears and into
the rack rails.
Outlet Outlet LED
Control Indicator
(Yes/No)? (Yes/No)?
No No
Yes Yes
No No
No No
Yes Yes
No No
No No
Yes Yes
No No
4
Shipped with
SNMP Slot
(Yes/No)?
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
1A
2A
Shipped with
SNMP Card
Installed
(Yes/No)?
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes