Markibar ORHI Manual De Instrucciones página 32

For the electrical connection of the grinder,
proceed as follows:
.
The grinder electrical connection point must be duly protected by current
limiters, a circuit interrupter and earth connection, according to current
.
safety regulations.
Make sure that the local voltage and frequency are as indicated on the
.
grinder rating plate.
Plug in the grinder. The following message will appear on the display:
.
Open the hopper lid and pour the coffee beans into the hopper. NEVER put
. .
GROUND COFFEE into the hopper.
Open the hopper gate (2) so that beans enter the grinding chamber.
Select the desired amount of coffee by pressing the corresponding key:
.
Button C ("1 CUP") or button E ("2 CUPS").
Insert the coffee maker holder into the holder guide (8) until you press the
. .
switch.
The corresponding amount will drop into the holder.
Compress with the tamper (7) to level the coffee, before inserting it into the
.
coffee maker.
.
The grinder automatically grinds the next dose.
The grinder is turned on or off with the ON/OFF button (B); in the Off
position, it is in stand-by.
32