Descargar Imprimir esta página

Hilti FX 3-A Manual De Instrucciones página 15

Ocultar thumbs Ver también para FX 3-A:

Publicidad

Idiomas disponibles

Idiomas disponibles

▶ Misuse can result in battery fluid escaping from the product. Avoid contact with this liquid. If contact
accidentally occurs, rinse with water. Seek medical attention if the liquid comes into contact with the
eyes. Liquid escaping from the battery can cause skin irritation or burns.
▶ Treat the product with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶ Do not use a damaged or modified welding machine. Damaged or modified components and products
can exhibit unpredictable behavior that can lead to explosions or risk of injury.
▶ Do not disassemble, squash or incinerate the product and the installed battery, do not subject them to
temperatures above 80 °C (176 °F) or burn them. Fire or temperatures above 130 °C (265 °F) can lead to
an explosion.
▶ Never expose the product to the direct rays of the sun, elevated temperature, sparking, or open flame.
This can lead to explosions.
▶ If the product is too hot to touch, it may be defective. Put the product in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the product
to cool down. If the product is still too hot to touch after an hour, it is faulty. Consult Hilti Service or read
the document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
→ page 15
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
3
Description
3.1
Product overview, welding machine
*2302409*
1
@
;
=
%
&
(
)
+
§
/
:
$
£
|
¡
Q
W
E
R
T
2302409
Current socket (-) for current connector of
the hand tool
Control-line connection
Current socket (+) for ground lead
Cover, inert-gas can
Eye for attaching the shoulder strap
Charger connection
Air-filter flap
Blanking cover (no function)
Grip
Connection for inert-gas can
Operating status indicator
Process-fault indicator
Display
On/off button
Adjuster button, right
Adjuster button, left
Temperature-fault indicator
Hand-tool fault indicator
Gas-level indicator
Battery state of charge indicator
Service indicator
English
5

Publicidad

loading

Productos relacionados para Hilti FX 3-A