Publicidad
Idiomas disponibles
Idiomas disponibles
Certain process deviations from the expected sequence can be detected and brought to the attention of the
user. No assessment of weld quality is made by this process analysis. It is not possible to detect all faults.
This process analysis is not a substitute for diligence and quality control on the part of the user!
If an irregularity is detected, always check the fault indicator on the welding machine and consult the
Troubleshooting → page 15 section.
Indicator
Hand tool
AFI
Fault indi-
cator
Welding
Operating
machine
status indica-
tor
Service
indicator
Process-
fault indicator
Hand-tool
fault indicator
Tempera-
ture indicator
3.7
Battery protection function
The product has a battery protection function to protect the battery against deep discharge. The battery
protection function warns the user when battery charge state is too low and switches the product off after 3
minutes.
Indicators
Indicator
Meaning
Battery is discharged
'F.02'
Battery discharged - the deep discharge prevention system has tripped.
3.8
Automatic power-off
The product has an automatic shutdown to extend the battery's operating time. The product shuts down
automatically if 60 minutes pass without a welding operation taking place.
3.9
Indicators for gas fill level and battery,
Indicator
Meaning
Inert-gas can full
Inert-gas can 75 % full
Inert-gas can 50 % full
Inert-gas can 25 % full
*2302409*
System
Hand tool
ready for
with stud
use
inserted
pressed
against
base metal,
ready for
triggering
Green
Green
light
light
Off
Green
light
Green
Green
light
light
Off
Off
Off
Off
Off
Off
Off
Off
Indicator
2302409
During the
Welding
welding
operation
operation
completed,
no irregu-
larities
Green
Off
light
Green
Off
light
Green
Green
light
light
Off
Off
Off
Off
Off
Off
Off
Off
Meaning
Battery fully charged
Battery 75 % full
Battery 50 % full
Battery 25 % full
Welding
operation
completed,
irregular-
ities de-
tected
Off
Flashing
red light
Off
Off
Flashing
red light
Off
Off
English
7
Publicidad
