Bose SoundDock 10 Guía De Usuario página 6

3. Bring your Bluetooth
system.
4. Turn on the Bluetooth feature in your music phone. For details on
using this feature, refer to the owner's guide for your phone.
5. In the list of found Bluetooth devices, find "Bose SoundDock 10" and
select it.
6. If prompted, enter the Bose
7. When your music phone confirms it is connected, check that the
Bluetooth light stops flashing and remains on.
NOTE: You can use the SoundDock 10 remote to control the connected music phone.
If your stereo Bluetooth music phone becomes disconnected
because it is out of range, the dock automatically tries to reconnect with it
(the Bluetooth light flashes during reconnection). If the SoundDock 10
system cannot restore a connection within five minutes, it turns off.
To disconnect, press Off on the Bose SoundDock 10 remote, or use the
disconnect command in your phone.
To reconnect when your system is off, press any remote key except
Off or AUX to turn on the system. The SoundDock 10 system then auto-
matically tries to connect with the most recently connected phone.
6
®
music phone close to the SoundDock
®
SoundDock 10 system passkey: 0000.
English
®
10