Publicidad
Idiomas disponibles
Idiomas disponibles
device B and put it into pairing mode.
2.
Double click the pairing
button
and the BTR
Innovation 5.2 will switch
back to search mode (green light flashing fast). The BTR
Innovation 5.2 starts searching for available Bluetooth
devices in range and generates the Bluetooth device names
in a list.
3.
Use the up and down keys of the device and the OK key to
select your Bluetooth device B from the list.
4.
After successful connection
(green light is always on), the
display shows the names of
the connected Bluetooth devices and the audio codec when
transferring music.
Notes:
∙ If you cannot connect to Bluetooth device B, double-click the
pairing button
on the device to try connecting again. If the
connection is not successful for a long time, you can restart the
device and repeat the procedure. Another possible solution is to
turn off the surrounding Bluetooth devices to avoid
misconnection issues.
∙ If the audio does not sound normal (no sound, stuttering,
hissing) after connecting to the Bluetooth device, you can
double-click the OK button
to SBC.
Important safety instructions
To avoid the risk of fire, electrical short circuit or damage to the
product, please follow these instructions:
1.
Do not expose the product to rain or moisture. Do not place
containers filled with water on the device.
2.
Do not install the device in a bookshelf, built-in cabinet or
similar confined space. Make sure that the device is well
ventilated.
3.
To prevent an electrical short circuit or fire due to overhea-
ting, do not cover the unit or place any objects on top of
the unit.
4.
Do not position the device near heat sources such as
20
List of
Device names
Successful
connection
to switch the audio encoding
EN
heaters, ovens, etc.
5.
Do not use near open flames or candles.
6.
Clean the device only with a dry cloth.
7.
Unplug the unit during lightning storms or when unused for
long periods of time.
8.
Protect the power cord from force such as crushing or
impact.
9.
Use only the accessories supplied.
10.
In case of service, please contact qualified service
personnel only.
Notes on the charging function and battery
Standard charging voltage: 5V+/-0.25V
Charging current: About 260mA on average
∙ This product has a built-in battery for long standby and usage
times. The device will automatically alarm when the battery is
low (the power icon on the display and the red charging light
flashes) and needs to be charged. (It is recommended to fully
charge the device before first use).
∙ Plug one end of the USB-C charging cable into the product's
charging port and the other end into a standard USB 5V power
outlet (such as a phone charger or computer USB port).
∙ The charging time is about 2.5 hours.
∙ Caution.
∙ If the battery power is too low or the quality of the charging
power supply is poor, power disturbances may occur during
charging.
∙ Frequent charging and simultaneous use of the BTR Innovation
5.2 may affect the battery life. Please do not use the BTR
Innovation 5.2 with too low battery level. Use with too low
a battery level over a long period of time may result in the
automatic battery protection not being able to be switched on.
Compliance with EU directives
This product is allowed to carry the CE mark. It complies with
EU Low Voltage Directive 2014/35/EU; EU Electromagnetic
Compatibility Directive 2014/30/EU; EU RoHS Directive 2011/65/
EU; EU Waste Electrical and Electronic Equipment (WEEE) Directive
2012/19/EC.
21
Publicidad
