LaserLiner DampFinder Compact Manual De Instrucciones página 13

7
Index mode (Determine building moisture)
The universal index mode is used to compare measuring points
and therefore to ascertain moisture. The moisture content of
building materials can be additionally determined in % with the
aid of the conversion table.
!
that the measured material is too dry. Perform a self-test
of the device with the protective cap to make sure the
device is in good working order.
8
°C / °F
OFF
DampFinder Compact
Be aware that walls (or surfaces)
with differing material structures,
or even variations in material
composition, can cause measure-
multiple comparative measurements.
You read off the measurement
results from the following index
scale and convert them to %
with the aid of the table.
Example
Building material: Anhydrite screed
Measured value: 280
Result: 0.1% material moisture
6 sec
°C <> °F
1 sec 3 sec
13
EN