Gardenline 21994-18 Manual Del Usuario página 6

I
D
F
E
STEP 6:
Insert Canopy Two Tier Ribs (D) into the four longer tubes of Connector
(I); see Fig. 1. Insert Canopy Middle Ribs (F) into four shorter tubes of
Connector (I); see Fig. 1. Insert Corner Canopy Ribs (E) into Canopy Two
Tier Ribs (D); see Fig. 2.
10
support@tdcusainc.com
MODEL: 22095-18 PRODUCT CODE: 7884
Assembly Instructions
I
Fig. 1
D
Fig. 2
AFTER SALES SUPPORT
04/2018
USA
F
STEP 7:
Place assembled ribs with connector over the height of assembled
frame. Insert Screws M6x15mm (P) through the ends of Corner Canopy
Ribs (E) and into the tops of Poles (A); see Fig. 1. Insert Screws M6x15mm
(P) through the ends of Canopy Middle Ribs (F), through Frame
Connector (J), and into the Right Frame (C); see Fig. 2.
*Complete assembly by securely tightening all screws.
AFTER SALES SUPPORT
1800 599 8898 1800 599 8898
MODEL: 22095-18 PRODUCT CODE: 7884
Assembly Instructions
Fig. 1
C
Fig. 2
P
P
(8) M6X15 mm Screw
support@tdcusainc.com
04/2018
USA
P
11