Panasonic AJ-YA93P Manual De Instrucciones página 2

Contents
Precautions ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-1
Model supported ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-1
Features ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-2
Installation in AJ-SD93 ‥‥‥‥‥‥‥‥‥‥‥‥‥E-2
Specifications ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-8
Precautions
• Do not touch or handle this product with wet hands.
• Do not drop this product or subject it to strong impact.
• Do not remodel this product.
Otherwise, malfunctioning or trouble may result.
The AJ-YA93P is an analog interface board which
is specifically designed to be used with the AJ-
SD93 digital VTR.
As such, it cannot be used with any other VTR.
To install the board in the AJ-SD93, consult your
dealer.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER MOUNTING OF THE OPTIONAL
INTERFACE BOARD TO AUTHORIZED SERVICE
PERSONNEL.
Model supported
AJ-SD93 digital VTR
E-1
Features
The AJ-YA93P is an analog interface board which is
specifically designed to be used with the AJ-SD93.
When it is installed in the AJ-SD93, the board enables
composite and component video signals, analog audio
signals for four audio channels and time code signals
to be input and output.
Using its reference video input facility, it can also
output video signals which have been synchronized
with external video signals. Furthermore, it comes with
an RS-422 (9-pin) connector to enable the AJ-SD93 to
be controlled using an external controller, etc.
Installation in AJ-SD93
CAUTION:
These servicing instructions are for use by
qualified service personnel only. To reduce the
risk of fire or electric shock do not perform any
servicing other than that contained in the
operating instructions unless you are qualified to
do so.
This product must be installed in the AJ-SD93 for use.
Follow the steps below for installation.
1.
Disconnect the power cord from the AJ-SD93.
E-2