Publicidad
Idiomas disponibles
Idiomas disponibles
ENG ORIGINAL INSTRUCTIONS
cord may be entangled by the mix container.
5) Ensure that the mix container is placed in a firm
and secure position. A container that is not pro-
perly secured may move unexpectedly.
6) Ensure that no liquid splashes against the hou-
sing of this power tool. Liquid that has penetrated
this power tool can cause damage and lead to
electric shock.
7) Follow the instructions and warnings for the ma-
terial to be mixed. Material to be mixed may be
harmful.
8) If this power tool falls into the material to be mi-
xed, unplug this power tool immediately and have
it checked by a qualified repair person. Reaching
into the mix container with this power tool still plu-
gged in can lead to electric shock.
9) Do not reach into the mix container with your
hands or insert any other objects into it while mi-
xing. Contact with the mix container may lead to
serious personal injury.
10) Start up and run down this power tool in the
mix container only. The mix container may bend or
spin in an uncontrolled manner.
11) Use this power tool only with a mix container
of at least 25 liter, height of 30 cm and diameter of
20 cm.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents. Do not operate this
power tool near flammable materials. Sparks could
ignite these materials. Keep away from children and
curious while operating a power tool. Distractions
can cause you to lose control. Keep bystanders a
safe distance away from work area. Anyone ente-
ring the work area must wear personal protective
equipment. Fragments of work piece or of a broken
accessory may fly away and cause injury beyond
immediate area of operation.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use com-
mon sense when operating this power tool. Do not
use this power tool while tired or under the influence
of drugs, alcohol or medicines. A moment of inat-
tention while operating this power tools may cause
damage serious personal.
USE PPE'S.
Wear personal protective equipment. Depending on
application, use a face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing pro-
tectors, gloves and workshop apron capable of stop-
ping small abrasive or work piece fragments. The eye
protection must be capable of stopping flying debris
generated by various operations. The dust mask or
respirator must be capable of filtrating particles gene-
rated by your operation. Prolonged exposure to high
intensity noise may cause hearing loss.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
times. This enables better control of this power tool
in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry. Keep your
hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught
in moving parts. If there are devices for connecting
means for extracting and collecting dust, make sure
they are connected and properly used. The use of
these devices can reduce dust related hazards.
ELECTRICAL SAFETY.
The plug of this power tool must match with the base
of the socket . Never modify the plug in any way . Do
not use any adapter plug with earthed power tools .
Unmodified plugs and matching bases will reduce
the risk of electric shock . Avoid body contact with
grounded surfaces such as pipes, radiators, cookers
and refrigerators . There is an increased risk of elec-
tric shock if your body is grounded . Do not expose
power tools to rain or wet conditions . Water entering
this power tool will increase the risk of electric shock.
DO NOT ABUSE THE CORD.
Never use the cord to carry, lift or unplug this pow-
er tool . Keep the cord away from heat, oil, sharp
edges or moving parts . Damaged or entangled
cords increase the risk of electric shock . When op-
erating this power tool outdoors, use an extension
cord suitable for outdoor use . The use of an ex-
tension cord suitable for outdoor use reduces the
risk of electric shock . If the use of this power tool
in a damp location is unavoidable, use a power
protected by a residual current device (RCD) . The
use of an RCD reduces the risk of electric shock.
AVOID ACCIDENTAL STARTING.
Make sure the switch is in "off" position before con-
necting to the network, or when taking or carrying
this power tool. Carrying power tools with your fin-
ger on the switch or plugging in power tools that
have the switch in "on" position invites to acci-
dents. Remove keys or tools before starting this
power tool. A left key or tool attached to a rotating
part of this power tool can cause personal injury.
3
English
Publicidad
