smaco S300 Plus Guia Del Usuario página 10

06
STORAGE AND MAINTENANCE
6.1 Storage Conditions:
It should be stored in the place with ambient temperature of 5
and relative humidity of 40%~70%;
It should not be placed within one meter from the heat source and in the
direct sunlight;
The warehouse where scuba is stored should not have oils, acids, alkalis
and other gaseous substances that can damage rubber material.
6.2
Transportation Conditions:
SMACO S300Plus scuba is small in size and light in weight, so it's very
convenient to carry. Violent shocks and vibrations during transportation
should be avoided. It should be kept clean without contacting with oils,
acids, alkalis and other substances that damage rubber and fabrics.
6.3 Product Maintenance
This product should be inspected or maintained once a year by an authorized
dealer or a professional diving organization to ensure it can be used normally.
Cylinders need to be hydrostatically tested every 5 years.
An annual visual inspection is recommended and the cylinder should be inspected
for corrosion, dents, cracks or other damage, both inside and outside.
The O-ring is a vulnerable part. If it is damaged during use, please replace it
immediately.
6.4 Deposite Conditions
The product should be disposed if the following cases occur:
The product itself is damaged, that is, it meets the disposal requirement
and cannot be used any more; for example, the cylinder case is broken, the
screw of cylinder valve is damaged or de-formed, the cylinder valve or
cylinder is deformed.
08
° C~30 ° C