smaco S300 Plus Guia Del Usuario página 9

05
COMMON TROUBLESHOOTING
5.1
Air leakage at the connection between pressure gauge and cylinder valve / Air
leakage at the connection between 8mm inflation plug and cylinder valve?
Answer: Use a wrench to tighten the pressure gauge and the
inflation plug to eliminate the malfunction.
5.2
Air leakage at the connection between the cylinder valve and the cylinder?
Answer: Take out the gasket and other accessories at the bottom
of the cylinder valve in order, rearrange them properly and reinstall
back in order. The valve should be aligned with the screw of
cylinder and tightened to eliminate the malfunction.
5.3
Air leakage at the port of inflation plug?
Answer: Remove the inflation plug, take off the O-shaped rubber
ring at the bottom and clean/replace with clean water, wipe off the
water and reinstall back to the original place. Make it tightened to
eliminate the malfunction.
07