Mark MOVILED BEAM 712 Instrucciones De Usuario página 6

EN
High efficiency, low power consumption
Super compact, low weight
Voltage:100
Fuse: 5A_(5*20MM)
Power consumption:150W (24V 2A,9V 12A)
Light source: 12W LED*7(R G B W)
Dimension:304mm*267mm*167mm
Weight:6.2kg
7.DMX512 control connections
Connect the provided XLR cable to the female 3 -pin XLR output of your
controller and the other side to the male 3 -pin XLR input of the moving
head. You can chain multiple
Moving head together through serial linking. The cable needed should be
two core, screened cable with XLR input and output connectors.
DMX512 connection with DMX terminator
For installations where the DMX cable has to run along distance or is in an
electrically noisy environment, such as in a discotheque, it is recommended
to use a DMX terminator .This helps in preventing corruption of the digital
control signal by electrical noise. The DMX terminator is simply an XLR
plug whith a 120R resistor connected between pins 2 and 3,which is then
plugged into the output XLR socket of the last fixture in the chain.
LCD Display Operations
MOVILED BEAM 712
240V,50/60HZ
User Manual/Manual de uso Pag 4